Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.
-
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® hood cape with an integrated shoulder cape and Velcro® closure. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening. Optional: 50mm silver reflective tape below both knees -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® casting suit, 330 g/m2. Jacket: High neck with Velcro® front closure and sleeves with a Velcro® strap adjustment. 50mm iron on silver reflective tape around both biceps and across back. Trousers: Elasticized waist and flame-resistant (FR) Velcro® closure down the side of each leg. 50mm iron on silver reflective tape around both knees. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe®casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure, half elastic waist (back), double layer fabric all around from knee to bottom hem. Front closure consists of metal zip and button. Optional: company logo embroidered on back pocket and 25mm lime reflective tape sewn on around both legs, just below knee. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening -
Application: Workwear for the hot metal industry, especially primary Aluminum smelters and downstream Aluminum manufacturing.PRODUCT DESCRIPTION
ALu-Safe® two-tone shirt, open front, Chinese collar with strap and Velcro® closure. Front closure consist of concealed press studs and Velcro®, two breast pockets with flap and Velcro® closure (left breast pocket is divided into two sections). Long inset sleeves end in a hemmed cuff with internal knitted storm cuff. Plain back with ventilated yoke. Optional: 50mm lime and silver reflective tape is sewn around both biceps, across full chest and back. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® shirt/jacket, HRC 2, ATPV 8.2 cal/cm2. Jacket with zip, storm flap with Velcro® closure, two breast pockets with flap and Velcro® closure, two side hunter style pockets, knitted cuff and collar. New "easy fit" design for comfort and a modern appearance. -
Application: Work wear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium processors.PRODUCT DESCRIPTION
ALu-Safe® trouser, HRC 2, ATPV 8.2 cal/cm2.Trouser with two straight side entry pockets, button fly with fastener on waist, half elastic waist back, right leg ruler pocket with flap and Velcro® closure and no back pockets. New "easy fit" design for comfort and a modern appearance. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® half open front shirt. Long sleeved shirt with a half open front, two front breast pockets with flap and button closure and gusseted adjustable cuff. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® open front shirt with concealed press-stud closure and storm flap. Standard collar with Velcro® closure. Two bottom patch pockets with flaps and concealed press stud closure. Two top pockets with flap and concealed press stud closure. Left top pocket has a pencil division. The back has breather vents to ensure user stays cool. Adjustable cuff with press stud closure. 50mm lime/silver reflective tape across back and over top pocket flaps. Company logo can be embroidered above left breast pocket. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® winter jacket. Two-tone open front winter jacket 810mm long, with fleecy liner. Zip front closure and over flap with concealed press-studs. Three outside pockets with press-studs and flaps, one breast and two lower waist high pockets. Three inner pockets, i.e. one breast and two lower waist high. 25mm Lime yellow reflective tape across chest and back. 25mm silver tape around both biceps. Optional: Embroidery on left chest above breast pocket. -
AQUA-TECH® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
PRODUCT DESCRIPTIONMid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot.
-
Work wear T-shirt with short sleeves and crew neck. -
FIRE-SAFE® Fire-Fighting Structural Boot Lace up boot with concealed zipper closure and quick release feature. High heat resistant soles. -
Application: Work wear for the molten metal industry.PRODUCT DESCRIPTION
METAL-SAFE® Smelter boot, molten metal splash, heat and flame resistant, molten metal single dip exposure up to 1000°C. Light and highly flexible, puncture resistant midsole, Electrical shock resistance up to 20kV (dry conditions), nonmagnetic, external metatarsal guard protection. -
METAL-SAFE® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. Highly moisture absorbent, anti-bacterial and resistant to molten metal splash. -
SURVIVE-ARC® BEANIE, ATPV 14 CAL/CM² CAT 2 -
SURVIVE-ARC® BOXER UNDERPANTS, 10,9 CAL/CM², CAT 2 -
Survive-ARC® E20300 safety boot (non-metallic). Full leather, non-metallic, safety half boot with laces, lining and padded collar. Comfortable modern design with energy absorbing heel, removable insole and puncture resistant textile midsole. The sole is non-slip, oil resistant, heat resistant to 300°C and additionally tested for electric shock resistance (dry conditions) up to 20kV. -
Survive-Arc® thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot.
-
SURVIVE-ARC® COVERALL ONE PIECE, ATPV 12,4 CAL/CM² CAT 2 -
SURVIVE-ARC® COVERALL ONE PIECE, ATPV 21 CAL/CM² CAT 2
-
SURVIVE-ARC® COVERALL ONE PIECE, ATPV 8,7 CAL/CM² CAT 2
-
SURVIVE-ARC® COVERALL TWO PIECE, ATPV 12,4 CAL/CM² CAT 2 -
SURVIVE-ARC® COVERALL TWO PIECE, ATPV 8,7 CAL/CM² CAT 2 -
SURVIVE-ARC® DOUBLE LAYER BALACLAVA, 28,2 CAL/CM² CAT 3 -
SURVIVE-ARC® DUST COAT, ATPV 12,4 CAL/CM² CAT 2 -
SURVIVE-ARC® JERSEY, ATPV 21,8 CAL/CM² CAT 2 -
SURVIVE-ARC® LEATHER OVERGLOVES -
SURVIVE-ARC® LONG SLEEVE CREW NECK TEE-SHIRT, 10,9 CAL/CM² CAT 2 -
SURVIVE-ARC® LOW ENERGY GOGGLE, 12 CAL/CM², CAT 2 WARNING: READ BEFORE USING THIS PRODUCT The Arc Goggle is designed to be worn with an approved arc flash balaclava that meets or exceeds the hazard assessment: electrical arc flash as per the hazard assessment requirements listed in NFPA 70E: 2004. Use an appropriate helmet/hard hat to provide required impact protection. This product does not meet the face shield requirements of NFPA 70E:2004. Arc flash clothing is intended to provide protection from thermal effects of arc flash and this product must be used as part of an appropriate set of PPC and PPE to protect against the hazards of arc flash. This product complies with standards that are intended to protect against arc flash in most situations that arise in normal use. There may be exceptional cases in which even the best protection is not enough to prevent the harm caused by arc flash or the related effects and, although the product meets statutory and industry specifications, the use of this product does not guarantee that the product will provide complete protection in those exceptional cases. If you are in doubt or do not fully understand these limitations, contact the manufacturer for full information. The product may be returned to the supplier if you are not willing to accept a product that is subject to the limitations set out above. The normal life span of the lens is one (1) year of outdoor service and two(2) years of indoor service. The lens should be replaced timeously to ensure optimal performance and safety. -
SURVIVE-ARC® POLO / GOLF SHIRT, 10,9 CAL/CM² CAT 2 -
SURVIVE-ARC® SHIRT, 8.7 CAL/CM² CAT 2 -
PRODUCT DESCRIPTIONSURVIVE-ARC® SINGLE LAYER BALACLAVA, 12,1 CAL/CM² CAT 2
