SURVIVE-ARC® Medium energy balaclava 27 cal/m2 CAT 3

Home/ELECTRIC ARC FLASH PROTECTIVE WEAR/Accessories/SURVIVE-ARC® Medium energy balaclava 27 cal/m2 CAT 3
SURVIVE-ARC® Medium energy balaclava 27 cal/m2 CAT 3

SURVIVE-ARC® Medium energy balaclava 27 cal/m2 CAT 3

Application: Electrical industry, petro- chemical and related industries.


Survive-ARC® balaclava, medium energy, CAT 3, ATPV 27 cal/cm2. Full face balaclava with one large port for the eyes. Must be worn tucked into your arc flash approved shirt or jacket.


ColourGreen blend
SizeOne size fits all
MaterialsFabric: Carbon and Kevlar blend, 153 g/m2.
Product StandardsFabric: NFPA 70E; ASTM F2178. ATPV1: 27 cal/cm2; HAF2: TBA
Hazard AssessmentsThermal effects from electric arc flash, flames and flash fires.
Product CommentsWARNING: READ BEFORE USING THIS PRODUCT Arc flash clothing is intended to provide protection from thermal effects of arc flash and this product must be used as part of an appropriate set of PPC and PPE to protect against the hazards of arc flash. This product complies with standards that are intended to protect against arc flash in most situations that arise in normal use. There may be exceptional cases in which even the best protection is not enough to prevent the harm caused by arc flash or the related effects and, although the product meets statutory and industry specifications, the use of this product does not guarantee that the product will provide complete protection in those exceptional cases. If you are in doubt or do not fully understand these limitations, contact the manufacturer for full information. The product may be returned to the supplier if you are not willing to accept a product that is subject to the limitations set out above.

Product Features

  • Designed to be worn with the Medium Energy Arc Goggle – both meet the electrical arc flash hazard assessment requirements listed in NFPA 70E and tested under ASTM F2178 together for an ATPV of 27 cal/cm2.
  • The Arc Goggle in combination with an approved Balaclava and helmet is the only known system that provides an alternative to the use of Bee Keeper style hoods for Electrical Arc Safety up to 27 cal/cm2. The balaclava and goggle together provides primary eye protection as per ANSI Z87.1. and replaces the safety glasses requirement.
  • Compatible with cap style and full brim safety helmets/hard hats.
  • Downloads

    Download Now

    Go to Top