-
CHARNAUD® FIRE-SAFE® Bushfire coverall Application: Work wear for Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® Bushfire coverall,with 6 pockets, strap and tab adjustments on sleeve and leg ends and lime silver reflective tape. -
CHARNAUD® FIRE-SAFE® 2 piece Conti Jacket and Trousers with 50mm Iron on FR Silver Tape Application: Work wear for Fire-Fighting, Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® 2 piece Conti Jacket and Trousers with 50mm Iron on FR Silver Tape. -
CHARNAUD® FIRE-SAFE® AIR-LITE Structural Fire-Fighting Bunker suit Application: Work wear for Structural Fire-Fighting, Wild-land and Rescue operations. PRODUCT DESCRIPTION CHARNAUD® FIRE-SAFE® Structural fire fighting jacket and trousers with 50mm wide segmented lime and silver reflective tape. Available in Full navy, two tone red and navy or two tone sand and navy. -
CHARNAUD® SURVIVE-ARC® ATPV: 15 Cal Reflective Braces, Orange Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® ATPV: 12.4 Cal Reflective Braces, Orange with 50mm lime and silver reflective tape and FR velcro closure/adjsutment -
SURVIVE-ARC® Switching Gloves, ATPV 100 cal/cm² CAT 4 -
SURVIVE-ARC® Switching Suit (Jacket, Trouser & Hood), ATPV 60 cal/cm² CAT 4 -
SURVIVE-ARC® VELCRO FR BELT -
CHARNAUD® FIRE-SAFE® FR Thermal socks. Application: Work wear for applications associated with fire-fighting. PRODUCT DESCRIPTION FR Multi Hazard Protection Socks, mid-calf length, with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot Add to quote Categories: HOT METAL PROTECTIVE WEAR, Safety Boots Tags: Africa, Europe, Global -
Application: General industrial environment, electrical maintenance and installation work, environments where worker’s safety footwear are exposed to flash fire and contact heat up to 300°C.PRODUCT DESCRIPTION
ACI-FLAM® E20300 safety boot (non-metallic). Full leather, non-metallic, safety half boot with laces, lining and padded collar. Comfortable modern design with energy absorbing heel, removable insole and puncture resistant textile midsole. The sole is non-slip, oil resistant, heat resistant to 300°C and additionally tested for electric shock resistance (dry conditions) up to 20kV. -
Application: General industrial environment, electrical maintenance, and installation work, environments where worker’s safety footwear are exposed to flash fire and contact heat up to 300°C.
PRODUCT DESCRIPTION
CHARNAUD® Zero-Tech® E20300 Safety Boot (non-metallic). Full leather, non-metallic, safety half boot with laces, lining, and padded collar. Comfortable modern design with energy absorbing heel, removable insole, and puncture resistant textile midsole. The sole is non-slip, oil resistant, heat resistant to 300°C, and additionally tested for electric shock resistance (dry conditions) up to 20kV. -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 17 cal/cm² Knitted gloves Application: Hand protection against thermal injuries of an arc flash, cuts and abrasion. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 17 cal/cm² Knitted gloves, Seamless knitted glove with FR synthetic rubber coated palm and fingers and elasticated wrist cuff. -
CHARNAUD® AQUA-TECH® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double-layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
AQUA-TECH® Trousers - PVC coated elastic waist trousers. Medium weight,160gsm, heavy weight 250gsm. Sizes: S - 5XL -
CHARNAUD® AQUA-TECH® APRON - 120cm X 70cm PVC apron, 550gsm, available in assorted colours -
Application: Workwear for rainy weather, wet conditions, in mining and general industrial environments.PRODUCT DESCRIPTION
Aqua-Tech® coat 125cm, heavy weight with buttons and hood. 125cm long coat with long sleeves, attached hood with draw cord, front closure with plasticized PVC buttons and buttonholes. Optional: Elasticized cuffs. -
CHARNAUD® AQUA-TECH® PVC coated jacket with button front and hood. Available in yellow, 102cm and 125cm. Heavy weight 250gsm. -
CHARNAUD® AQUA-TECH® SUIT - PVC coated suit with button front and hood and elasticated trousers, available in yellow. Medium weight 160gsm, heavyweight 250gsm. Sizes: S - 5XL -
CHARNAUD® ZERO-TECH® Flame Resistant Freezer Trousers. -
Application: Work wear for foundries, chemical plants and the oil and gas industry.PRODUCT DESCRIPTION
CHARNAUD® Zero-Tech® flame-resistant waterproof, freezer jacket with hood. Attached hood with draw cord, front zip closure with press stud flap over, side slit pockets and black cuff ribbing on the sleeves. Full quilted liner. -
CHARNAUD® ZERO-TECH® FR thermal socks. Mid-calf sock with thick cushioned terry footbed, reinforced toe and heel section. Double-layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
ACI-FLAM® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
CHARNAUD® FIRE-SAFE® Structural Rubber Fire-Fighting Boot Application: Structural-, veld- and grass fires & rescue work. PRODUCT DESCRIPTION CHARNAUD® FIRE-SAFE® Structural Rubber Fire-Fighting Boot, two tone yellow and black rubber with pull tabs -
CHARNAUD®FIRE-SAFE® Structural Fire-Fighting Helmet Application: Work wear for Structural Fire-Fighting, Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD®FIRE-SAFE® Structural Fire-Fighting Helmet with metal dee ring and rubber rimmed brim. Supplied with 6 inch visor and fabric neck flap. -
CHARNAUD®FIRE-SAFE® CoolVest Application: Environments where control of core body temperature is essential to work safely and productively. PRODUCT DESCRIPTION CHARNAUD®FIRE-SAFE® CoolVest, one piece vest with zip front closure and elasticated side panels. -
CHARNAUD®FIRE-SAFE® FR Short sleeve T-shirt Application: Work wear for applications associated with fire-fighting. PRODUCT DESCRIPTION CHARNAUD®FIRE-SAFE® FR Short sleeve T-shirt -
CHARNAUD®FIRE-SAFE® One Piece Coverall Application: Work wear for applications associated with wild land fire-fighting. PRODUCT DESCRIPTION: CHARNAUD®FIRE-SAFE® One Piece Coverall, 5 pockets with optional FR reflective tape around biceps and legs. -
CHARNAUD® FIRE-SAFE® RESCUE-LITE Fire-Fighting Bunker suit Application: Work wear for Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® RESCUE-LITE Fire-Fighting Bunker suit with 50mm wide segmented silver reflective tape. Available in two tone red and navy -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Leg/Foot Spat FR thermal liner APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Leg/Foot Spat: FR thermal lined Spat with velcro back opening and strap which secures to underneath of boot for proper fit. Optional: Available in 2 sizes -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Lift Front Hood with FR thermal liner and gold on green visor. APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: Hood: FR thermal lined Hood with lift front gold on green visor, attached to a internally fitted hard hat. Optional: Motorized ventilation fans fitted to back panel of hood, supplied with self contained power source. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Trouser with FR thermal liner APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: Trouser: FR thermal lined Trouser with attached adjustable black webbing braces, FR Velcro® front fly closure, gusseted waist with velcro adjustment and expansion pleats on either side. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Coat with FR thermal liner 125cm long APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: 125cm long coat: FR thermal lined Coat, 125cm long with press studs and velcro or metal snap dee front closure, velcro sleeve tab closure, back breather vents, under-arm gussets and Expansion pleats on either side. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Apron with FR thermal liner APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Apron: FR thermal lined Apron with velcro adjustable straps around neck and waist. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised 5 finger glvoes with FR thermal liner and leather palms APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Glove: FR Thermal liner glove with leather palms. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Apron with FR thermal liner APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Sleeve Protector: FR Thermal liner Sleeve Protector with elasticated top and bottom for premium fit. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Hood with FR thermal liner and fixed gold on green visor. APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: Hood: FR thermal lined Hood with fixed gold on green visor and stainless steel visor guard, available in regular or longer length with side straps featuring velcro adjustment. Optional: Motorized ventilation fans fitted to back panel of hood, supplied with self contained power source. -
CHARNAUD® METAL-SAFE® Hot Metal Boot Application: Work wear for the molten metal industry. PRODUCT DESCRIPTION Leather smelter and furnace boot with heat resistant sole, external metatarsal guard and lace up system incorporating a quick release zipper system. -
CHARNAUD® METAL-SAFE® FR Thermal socks. Application: Work wear for the molten metal industry. PRODUCT DESCRIPTION FR Multi Hazard Protection Socks, mid-calf length, with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot
-
ALU-SAFE® CHARNAUD hot metal boot Application: Workwear for the aluminium manufacturing industry.PRODUCT DESCRIPTION
Alu-Safe® CHARNAUD Hot Metal Boot. Leather smelter and furnace boot with rubber sole and external metatarsal guard. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® double layer balaclava, HRC 2, ATPV 18 cal/cm2. Full faced, double layer, light weight interlock knit balaclava. -
Alu-Safe Hood Cape Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® hood cape with an integrated shoulder cape and Velcro® closure. -
Application: Work wear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium processors.PRODUCT DESCRIPTION
ALu-Safe® long johns. Knitted long underpants with drawstring. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® T- shirt with long sleeves and a crew neck. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® T- shirt with short sleeves and a crew neck. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® casting suit, 330 g/m2. Jacket: High neck with Velcro® front closure and sleeves with a Velcro® strap adjustment. 50mm iron on silver reflective tape around both biceps and across back. Trousers: Elasticized waist and flame-resistant (FR) Velcro® closure down the side of each leg. 50mm iron on silver reflective tape around both knees. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe®casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure, half elastic waist (back), double layer fabric all around from knee to bottom hem. Front closure consists of metal zip and button. Optional: company logo embroidered on back pocket and 25mm lime reflective tape sewn on around both legs, just below knee. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening. Optional: 50mm silver reflective tape below both knees -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe®visitors coat. Knee length visitors coat with press stud front closure. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® winter jacket. Two-tone open front winter jacket 810mm long, with fleecy liner. Zip front closure and over flap with concealed press-studs. Three outside pockets with press-studs and flaps, one breast and two lower waist high pockets. Three inner pockets, i.e. one breast and two lower waist high. 25mm Lime yellow reflective tape across chest and back. 25mm silver tape around both biceps. Optional: Embroidery on left chest above breast pocket. -
ALU-SAFE® QV664 Flame-Resistant Shirt Two Tone Application: Workwear for the hot metal industry, especially primary Aluminum smelters and downstream Aluminum manufacturing.PRODUCT DESCRIPTION
ALu-Safe® shirt two-tone, open front, Chinese collar with strap and Velcro® closure. Front closure consist of concealed press studs and Velcro®, two breast pockets with flap and Velcro® closure (left breast pocket is divided into two sections). Long inset sleeves end in a hemmed cuff with internal knitted storm cuff. Plain back with ventilated yoke. Optional: 50mm lime and silver reflective tape is sewn around both biceps, across full chest and back. -
ALU-SAFE® QV853 Open Front Shirt D3 E3 Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® open front shirt with concealed press-stud closure and storm flap. Standard collar with Velcro® closure. Two bottom patch pockets with flaps and concealed press stud closure. Two top pockets with flap and concealed press stud closure. Left top pocket has a pencil division. The back has breather vents to ensure user stays cool. Adjustable cuff with press stud closure. 50mm lime/silver reflective tape across back and over top pocket flaps. Company logo can be embroidered above left breast pocket. -
CHARNAUD® SURVIVE-ARC® E2300 Safety Boots 20000V, Black Application: Foot protection for special electrical applications. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® E2300 Safety Boots 20000V, Black safety half boot with laces, lining and padded collar. -
CHARNAUD® SURVIVE-ARC® FR Thermal socks. Application: Multi hazard foot protection in all industries, particularly: utilities, construction, oil & gas, mining, petrochemical, manufacturing, machinery and maintenance. PRODUCT DESCRIPTION FR Multi Hazard Protection Socks, mid-calf length, with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot -
SURVIVE-ARC® LEATHER OVER GLOVES -
Application: Work wear for the electrical industry.PRODUCT DESCRIPTION
Survive-ARC® knitted glove, CAT 3, ATPV 28.2 cal/cm2. Double layer fabric, 5-finger knitted glove with ribbed cuff. -
SURVIVE-ARC® 12.4 cal CAT 2 knitted Gloves -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 10,9 cal/cm² Knitted Kopdoek Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 10,9 cal/cm² Knitted Kopdoek, tirangular shpaed, double layer kop doek. -
SURVIVE-ARC® CAT 3, Transparent Headgear Kit, 25cal/cm² STOCK CODE SAHO2B COLOUR Face shield: Grey. Chin protector: Grey. Bracket: Blue SIZE One size fits all -
SURVIVE-ARC® TRANSPARENT HEADGEAR KIT, 14CAL/CM², CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 2, 14 Cal Beanie, Blue/Grey Application: Where flame-resistant(FR) PPC is required-hot metal industry, military applications, fire fighting and electrical arcflash (flame-andarcresistant). PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, 14 Cal Beanie, Blue/Grey, fitted, with turn ups. -
CHARNAUD® SURVIVE-ARC® CAT 3, ATPV: 28,2 cal/cm² Double Layer Balaclava, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 28,2 cal/cm² Full face, double Layer Balaclava, Navy Blue with 2 eye openings and sohoulder flares -
PRODUCT DESCRIPTIONSURVIVE-ARC® SINGLE LAYER BALACLAVA, 12,1 CAL/CM² CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 45,8cal/cm² High Energy Balaclava Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 45,8cal/cm² High Energy Balaclava, Full face balaclava with dual eye port design and a honey-comb breathing chamber. To be worn tucked into your arc flash approved shirt or jacket. -
CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 45,8cal/cm² High Energy Goggle and Balaclava Kit Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 45,8cal/cm² High Energy Goggle and Balaclava Kit which is designed to be worn togehter, tucked into the jacket. -
CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 50cal/cm² High Energy Goggle Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 4, ATPV: 50cal/cm² High Energy Goggle, A primary protective Arc Goggle designed to specifically address the requirements of arc flash protection. -
SURVIVE-ARC® LOW ENERGY GOGGLE, 12 CAL/CM², CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 2, 10,9 cal/cm² Boxer underpants, Navy Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, 10,9 cal/cm² Boxer underpants, Navy, with elastictaed wiast band. -
SURVIVE-ARC® LONG SLEEVE CREW NECK TEE-SHIRT, 10,9 CAL/CM² CAT 2 -
SURVIVE-ARC® Long Johns Underpants , 10,9 cal/cm² CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 25 cal/cm² Two Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 25 cal/cm² Jacket with three pockets, zip and flap over closure. Trousers with three pockets, additional ruler pocket featuring zip and button front closure. Optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV:15 cal/cm² Two Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, ATPV:15 cal/cm² Two Piece Coverall, Navy Blue. Jacket with three pockets, zip and flap over closure. Trousers with three pockets, additional ruler pocket featuring zip and button front closure. Optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 8,7 cal/cm² Two Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 8,7 cal/cm² Two Piece Coverall, Navy Blue jacket with three pockets, zip and flap over closure. Trousers with three pockets, additional ruler pocket featuring zip and button front closure. Optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request
-
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 25 cal/cm² One Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 25 cal/cm² One Piece Coverall, Navy Blue with five pockets, long sleeves and optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 15 cal/cm² One Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 15 cal/cm² One Piece Coverall, Navy Blue with five pockets, long sleeves and optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request
-
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV:8,7 cal/cm² One Piece Coverall, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 8,7 cal/cm² One Piece Coverall, Navy Blue with five pockets, long sleeves and optional FR reflective tape applied on biceps and knees. Available in ladies fit upon request -
SURVIVE-ARC® TROUSERS CHINO, 12.4 CAL/CM² CAT 2. STYLE NUMBER 6UC28 - 6UC44 COLOR NAVY BLUE SIZE 28"-44" -
SURVIVE-ARC® TROUSERS CHINO, 21 CAL/CM² CAT 2. STYLE NUMBER 6UD28- 6UD44 COLOUR Navy SIZE 28"- 44" -
SURVIVE-ARC® STRETCH DENIM JEANS, 17 CAL/CM², CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV:15 cal/cm² Dust Coat, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV:15 cal/cm² Dust Coat, Navy Blue with long sleeves, press stud front closure and three pockets Optional FR reflective tape applied on biceps. -
SURVIVE-ARC® JERSEY, ATPV 21CAL/CM² CAT 2 -
CHARNAUD® SURVIVE-ARC® CAT 4, 40 cal/cm² Conti Winter Jacket, Navy Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 4, 40 cal/cm² Conti Winter Jacket, Navy Blue with fleecey liner, long sleeves, three front pockets, zip and flap over front closure featuring 25mm silver reflective tape around biceps, cross on back and strip on right breast. -
SURVIVE-ARC® Winter Jacket 40 cal CAT 4 -
CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 21cal/cm² Fleecey Long Sleeve Henley Styled Shirt Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION CHARNAUD® SURVIVE-ARC® CAT 2, ATPV: 21cal/cm² Fleecey Long Sleeve Henley Styled Shirt with long sleeves, one pocket and 3 button front closure. -
CHARNAUD® SURVIVE-ARC® CAT 2 Polo Shirt, 10,9 cal/cm² -
CHARNAUD® SURVIVE-ARC® CAT 2, 8,3 cal/cm² Long Sleeve, Open Front Shirt, Chambray Blue Application: Arc flash protective work wear for the electrical industry. PRODUCT DESCRIPTION: CHARNAUD® SURVIVE-ARC® CAT 2, 8,3 cal/cm² Long Sleeve, Open Front Shirt, Chambray Blue, with long sleeves, button front closure and two breast pockets. Available in ladies fit upon request Add to quote Categories: ELECTRIC ARC FLASH PROTECTIVE WEAR, Daily Work Wear, Men's daily workwear Tag: Africa -
SURVIVE-ARC® SHIRT, 8.7 CAL/CM² CAT 2 -
SURVIVE-ARC® SHIRT, 12,4 CAL/CM² CAT 2 -
SURVIVE-ARC® Switching Hood, ATPV 100 cal/cm² CAT 4 -
SURVIVE-ARC® Switching Mitts, ATPV 60 cal/cm² CAT 4 STYLE NUMBER 6GX1- 6GX5 COLOUR Orange SIZE S-2XL -
PRODUCT DESCRIPTION
Survive-ARC® Switching Gloves, CAT 4, ATPV 51.5 cal/cm2. Fabric switching glove with stiff cuff.STYLE NUMBER
6GI1- 6GI4COLOR
Royal blueSIZE
S-XL -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Coat with FR thermal liner 145cm long APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: 145cm long coat: FR thermal lined Coat, 145cm long with press studs and velcro or metal snap dee front closure, velcro sleeve tab closure, back breather vents, under-arm gussets and Expansion pleats on either side. -
CHARNAUD® AQUA-TECH® PVC coated jacket with button front and hood. Available in yellow, 76cm and 125cm. Heavy weight 250gsm. -
CHARNAUD® SURVIVE-ARC® SHIRT, 12,4 CAL/CM² CAT 2 with 50mm Silver and Lime reflective tape -
CHARNAUD® SURVIVE-ARC® SHIRT, 12,4 CAL/CM² CAT 2 with Silver reflective tape
Copyright © 2020 CHARNAUD & Co (Pty) Ltd. All rights reserved.
All information stated in CHARNAUD ® & Co (Pty) Ltd Literature is only for guidance and cannot be considered as contractual. CHARNAUD ® & Co (Pty) Ltd is entitled to modify this information without notification and would not be obliged to supply products or materials that conform to those previously in force.