Application: General industrial environment, electrical maintenance and installation work, environments where worker’s safety footwear are exposed to flash fire and contact heat up to 300°C.
-
ACI-FLAM® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® double layer balaclava, HRC 2, ATPV 18 cal/cm2. Full faced, double layer, light weight interlock knit balaclava. -
Application: Work wear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium processors.PRODUCT DESCRIPTION
ALu-Safe® long johns. Knitted long underpants with drawstring. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® T- shirt with long sleeves and a crew neck. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® T- shirt with short sleeves and a crew neck. -
ALU-SAFE® CHARNAUD hot metal boot Application: Workwear for the aluminium manufacturing industry.PRODUCT DESCRIPTION
Alu-Safe® CHARNAUD Hot Metal Boot. Leather smelter and furnace boot with rubber sole and external metatarsal guard. -
Alu-Safe Hood Cape Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® hood cape with an integrated shoulder cape and Velcro® closure. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening. Optional: 50mm silver reflective tape below both knees -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® casting suit, 330 g/m2. Jacket: High neck with Velcro® front closure and sleeves with a Velcro® strap adjustment. 50mm iron on silver reflective tape around both biceps and across back. Trousers: Elasticized waist and flame-resistant (FR) Velcro® closure down the side of each leg. 50mm iron on silver reflective tape around both knees. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe®casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure, half elastic waist (back), double layer fabric all around from knee to bottom hem. Front closure consists of metal zip and button. Optional: company logo embroidered on back pocket and 25mm lime reflective tape sewn on around both legs, just below knee. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® casual trouser with belt loops, two slanted side pockets, one right back pocket with button flap closure. Front closure consists of metal press stud fastening -
ALU-SAFE® QV664 Flame-Resistant Shirt Two Tone Application: Workwear for the hot metal industry, especially primary Aluminum smelters and downstream Aluminum manufacturing.PRODUCT DESCRIPTION
ALu-Safe® shirt two-tone, open front, Chinese collar with strap and Velcro® closure. Front closure consist of concealed press studs and Velcro®, two breast pockets with flap and Velcro® closure (left breast pocket is divided into two sections). Long inset sleeves end in a hemmed cuff with internal knitted storm cuff. Plain back with ventilated yoke. Optional: 50mm lime and silver reflective tape is sewn around both biceps, across full chest and back. -
ALU-SAFE® QV853 Open Front Shirt D3 E3 Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
Alu-Safe® open front shirt with concealed press-stud closure and storm flap. Standard collar with Velcro® closure. Two bottom patch pockets with flaps and concealed press stud closure. Two top pockets with flap and concealed press stud closure. Left top pocket has a pencil division. The back has breather vents to ensure user stays cool. Adjustable cuff with press stud closure. 50mm lime/silver reflective tape across back and over top pocket flaps. Company logo can be embroidered above left breast pocket. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe®visitors coat. Knee length visitors coat with press stud front closure. -
Application: Workwear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium manufacturing.PRODUCT DESCRIPTION
ALu-Safe® winter jacket. Two-tone open front winter jacket 810mm long, with fleecy liner. Zip front closure and over flap with concealed press-studs. Three outside pockets with press-studs and flaps, one breast and two lower waist high pockets. Three inner pockets, i.e. one breast and two lower waist high. 25mm Lime yellow reflective tape across chest and back. 25mm silver tape around both biceps. Optional: Embroidery on left chest above breast pocket. -
CHARNAUD® AQUA-TECH® FR thermal socks. Mid-calf length sock with thick cushioned terry foot bed, reinforced toe and heel section. Double-layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot. -
Application: Workwear for rainy weather, wet conditions, in mining and general industrial environments.PRODUCT DESCRIPTION
Aqua-Tech® coat 125cm, heavy weight with buttons and hood. 125cm long coat with long sleeves, attached hood with draw cord, front closure with plasticized PVC buttons and buttonholes. Optional: Elasticized cuffs. -
AQUA-TECH® Trousers - PVC coated elastic waist trousers. Medium weight,160gsm, heavy weight 250gsm. Sizes: S - 5XL -
CHARNAUD® AQUA-TECH® SUIT - PVC coated suit with button front and hood and elasticated trousers, available in yellow. Medium weight 160gsm, heavyweight 250gsm. Sizes: S - 5XL -
CHARNAUD® AQUA-TECH® PVC coated jacket with button front and hood. Available in yellow, 76cm and 125cm. Heavy weight 250gsm. -
CHARNAUD® AQUA-TECH® APRON - 120cm X 70cm PVC apron, 550gsm, available in assorted colours -
CHARNAUD® FIRE-SAFE® 2 piece Conti Jacket and Trousers with 50mm Iron on FR Silver Tape Application: Work wear for Fire-Fighting, Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® 2 piece Conti Jacket and Trousers with 50mm Iron on FR Silver Tape. -
CHARNAUD® FIRE-SAFE® AIR-LITE Structural Fire-Fighting Bunker suit Application: Work wear for Structural Fire-Fighting, Wild-land and Rescue operations. PRODUCT DESCRIPTION CHARNAUD® FIRE-SAFE® Structural fire fighting jacket and trousers with 50mm wide segmented lime and silver reflective tape. Available in Full navy, two tone red and navy or two tone sand and navy. -
CHARNAUD® FIRE-SAFE® Bushfire coverall Application: Work wear for Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® Bushfire coverall,with 6 pockets, strap and tab adjustments on sleeve and leg ends and lime silver reflective tape. -
CHARNAUD®FIRE-SAFE® CoolVest Application: Environments where control of core body temperature is essential to work safely and productively. PRODUCT DESCRIPTION CHARNAUD®FIRE-SAFE® CoolVest, one piece vest with zip front closure and elasticated side panels. -
CHARNAUD® FIRE-SAFE® FR Thermal socks. Application: Work wear for applications associated with fire-fighting. PRODUCT DESCRIPTION FR Multi Hazard Protection Socks, mid-calf length, with thick cushioned terry foot bed, reinforced toe and heel section. Double layer shank, knitted in an elastomeric “skeleton” that hugs the entire foot Add to quote Categories: HOT METAL PROTECTIVE WEAR, Safety Boots Tags: Africa, Europe, Global -
CHARNAUD®FIRE-SAFE® One Piece Coverall Application: Work wear for applications associated with wild land fire-fighting. PRODUCT DESCRIPTION: CHARNAUD®FIRE-SAFE® One Piece Coverall, 5 pockets with optional FR reflective tape around biceps and legs. -
CHARNAUD® FIRE-SAFE® Structural Rubber Fire-Fighting Boot Application: Structural-, veld- and grass fires & rescue work. PRODUCT DESCRIPTION CHARNAUD® FIRE-SAFE® Structural Rubber Fire-Fighting Boot, two tone yellow and black rubber with pull tabs -
CHARNAUD® FIRE-SAFE® RESCUE-LITE Fire-Fighting Bunker suit Application: Work wear for Wild-land and Rescue operations. PRODUCT DESCRIPTION: CHARNAUD® FIRE-SAFE® RESCUE-LITE Fire-Fighting Bunker suit with 50mm wide segmented silver reflective tape. Available in two tone red and navy -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised 5 finger glvoes with FR thermal liner and leather palms APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Glove: FR Thermal liner glove with leather palms. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Apron with FR thermal liner APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Apron: FR thermal lined Apron with velcro adjustable straps around neck and waist. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Coat with FR thermal liner 125cm long APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: 125cm long coat: FR thermal lined Coat, 125cm long with press studs and velcro or metal snap dee front closure, velcro sleeve tab closure, back breather vents, under-arm gussets and Expansion pleats on either side. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Coat with FR thermal liner 145cm long APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: 145cm long coat: FR thermal lined Coat, 145cm long with press studs and velcro or metal snap dee front closure, velcro sleeve tab closure, back breather vents, under-arm gussets and Expansion pleats on either side. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Hood with FR thermal liner and fixed gold on green visor. APPLICATION: Workwear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION: Hood: FR thermal lined Hood with fixed gold on green visor and stainless steel visor guard, available in regular or longer length with side straps featuring velcro adjustment. Optional: Motorized ventilation fans fitted to back panel of hood, supplied with self contained power source. -
CHARNAUD® METAL-SAFE® ALPAN K Aluminised Leg/Foot Spat FR thermal liner APPLICATION Work wear for radiant heat protection in furnaces and high heat exposure applications. PRODUCT DESCRIPTION Leg/Foot Spat: FR thermal lined Spat with velcro back opening and strap which secures to underneath of boot for proper fit. Optional: Available in 2 sizes
